Sélecteur d’examples de pièces coulées en alliage de zinc
There are 12 studies matching your search criteria.
Automotive Shift Level
This shift lever connects the shifter and the gear in ZF automotive gearboxes. This part was originally an aluminum cast part but required tapping and other secondary operations to meet the close tolerances. Thanks to the to close collaboration with the customer,...
Caster Housing
Part cast with Zincopor(R) technology which resulted in a weight reduction of 25%. With an annual production rate of 235,000 part/year, this represents a 10 tonnes reduction of zinc alloy.
Centrale Console
Key benefits: Outstanding control of each step and parameters involved in the full process i.e. from design to final part to achieve “the perfection” Same surface quality and appearance obtained on all the 6 cast parts of this assembly Fingers print surface free !!...
Electronic Connector
Key benefits: Close cooperation between diecaster and customer : clipping system Modern assembling technology : no screw = no creep!! This excellent product is the result of the perfect knowledge of tooling and casting
Gear Knob AMG (Mercedes)
This casting part was originally produced in die-cast aluminum. It could be produced only with disproportionate effort and high scrap rates. The parting plane in the casting could never reach the surface quality standards because at that position was a vacuum...
High Tension Cage
The part is a device component warranting the operators security during the intervention on high-tension lines. Reasons for choosing zinc alloy: Complex tool design Combination of thin wall casting and rigidity Dimensional requirements e.g. internal and external...
Jeweller’s perfume
The most famous Parisian jeweller, “”Boucheron””, has created a perfume, with a particularly outstanding design of bottle – an enlargement of a ring. The blue cap symbolises a cut stone whilst the bottle itself is supported in a fine...
Motor Chassis
This chassis for a motor drive unit for an automatic opening roller door was made from several pressed metal parts prior to being designed as a zinc diecasting. Diecasting in zinc alloy 3 provided the following benefits: 1.) Additional features such as pockets, the...
Perfume Vaporizer for Hand Bags
The part : This set of six parts, four of which are made of Zamak, makes up a rechargeable perfume vaporiser. The manufacturing : Some characteristics of the final product : – complexity of the assembly compared with the available space, – combination of...
Subframe and Carriage
The 3 parts form a subassembly that allows measuring the thickness of ophthalmic lenses before edging. The frame ensures the palpate lever guidance in the ophthalmic glass machine tool. Then, the glass is machined with the contour note during the palpate operation....
Toothed Wheel
This toothed wheel consists of two parts which are assembled with cast-in spigots and bolts in special steel. The parts are made in zinc alloy ZA-27, and apart from trimming, receive no machining or other finishing operations. The part is produced in two sizes, the...